Артикул: RX8666
В наличии
Heavy-duty Ball Runner Block SLS, standard, steel R1623 … 10
Цена по запросу Стоимость зависит от выбранного способа оплаты и количества товара.
Не отвечаем 5 минут — скидка на весь заказ!
Нужна скидка? Звони — сделаем лучшее предложение
Работаем по всей России
Возможны самовывоз и доставка по всей территории России
Надежность
Профессиональная поддержка
Description
- Area of application: For restricted space in transverse direction
- Heavy-duty Ball Runner Block for heavy machine construction with extremely high load-bearing capacity
- High torque capacity
- The same high load ratings in all four main directions of loading
- Low noise level and outstanding travel behavior
Features
- Different preload classes
- Lube fittings with metal threads on all sides
- Can be used on all SNS Ball Guide Rails
- High rigidity in all load directions – permits applications with just one runner block per rail
- End-face fastening thread for all attachments
- Long-term lubrication is possible over several years
Product description
load errorTechnical data
Load capacities and load moments
| Size | 55 | 65 | ||
| C | N |  | 139000 | 223000 |
| C0 | N | 245000 | 404000 | |
| Mt | Nm |  | 4410 | 8810 |
| Mt0 | Nm | 7780 | 16000 | |
| ML | Nm |  | 3960 | 8160 |
| ML0 | Nm | 6990 | 14800 | |
| The calculation of the dynamic load ratings and load moments is based on a stroke length of 100,000 m as per DIN ISO 14728-1. However, often only 50,000 m is actually stipulated. For comparison: Multiply the values C,Mt and ML from the table by 1.26. |
General technical data
| Size | 55 | 65 | |
| amax 1) | m/s² | 250 | |
| vmax | m/s | 3 | |
| m | kg | 4.8 | 9.8 |
| μ 2) | 0.002 ... 0.003 | ||
| Material | CS | ||
| Operating conditions | |||
| Size | 55 | 65 | |
| Permissible ambient temperature (min ... max) 3) | -10 °C ... +80 °C | ||
| 1) | If Fcomb > 2.8 • Fpr : amax = 50 m/s2 |
| 2) | Without friction of seal |
| 3) | Up to 100 °C permissible for short periods. For operation at negative temperatures, please consult us. |
Legend
| Symbol | Description | Unit |
| amax | Maximum acceleration travel | m/s2 |
| C | Dynamic load capacity | N |
| C0 | Static load capacity | N |
| m | Mass | kg |
| ML | Dynamic longitudinal moment load capacity | Nm |
| ML0 | Static longitudinal moment load capacity | Nm |
| Mt | Dynamic torsional moment load capacity | Nm |
| Mt0 | Static torsional moment laod capacity | Nm |
| vmax | Maximum permissible speed | m/s |
| μ | Friction coefficient |
General Notes
The general technical data and calculations apply to all Ball Rail Systems i.e. to all Ball Runner Blocks and Ball Guide Rails. Specific technical data relating to the individual Ball Runner Blocks and Ball Guide Rails is listed separately.
Preload classes
To cover the widest possible range of applications, Rexroth Ball Runner Blocks are available in different preload classes.
The following preload classes are available:
- Ball Runner Block without preload (preload class C0)
- Ball Runner Blocks with moderate preload (preload class C1)
- Ball Runner Blocks with average preload (preload class C2)
- Ball Runner Blocks with high preload (preload class C3)
To prevent reductions to the service life, the preload should not exceed 1/3 of the load on bearing F.
In general, the rigidity of the Ball Runner Block rises with increasing preload. If vibrations occur, select a correspondingly high preload (≥ preload class C2).
Guide systems with parallel rails
When choosing the preload class, pay attention to permissible parallelism offset of rails too ("Accuracy class selection criterion").
When specifying ball rail systems of accuracy class N, we recommend preload class C0 or C1 to avoid distortive stress due to the tolerances.
Accuracy classes
System preload
Dimensions
| a) | Lube nipple, size 55: |
| Hydraulic-type lube nipple DIN 71412-B M6x8, B2 = 16 mm | |
| Lube nipple, size 65: | |
| Hydraulic-type lube nipple DIN 71412-B M8x1x8, B2 = 16 mm | |
| When using different lube nipples, pay attention to the screw-in depth of 8 mm! | |
| The lube nipple is included in the scope of delivery (not installed). | |
| Connection is possible on end-face. | |
| b) | Size 65 |
Dimensions
| Size | 55 | 65 | |
| A | mm | 100 | 126 |
| A1 | mm | 50 | 63 |
| A2 | mm | 53 | 63 |
| A3 | mm | 23.5 | 31.5 |
| B | 199 mm +0.5 | 243 mm +0.5 | |
| B1 | mm | 155.5 | 194.6 |
| E1 | mm | 75 | 76 |
| E2 | mm | 95 | 120 |
| E8 | mm | 80 | 76 |
| E8.1 | mm | - | 100 |
| E9 | mm | 22.3 | 11 |
| E9.1 | mm | - | 53.5 |
| H | mm | 70 | 90 |
| H1 | mm | 57 | 76 |
| Dimension H2 with cover strip | mm | 48.15 | 60.15 |
| Dimension H2 without cover strip | mm | 47.85 | 59.85 |
| K3 | mm | 9 | 16 |
| N3 | mm | 19 | 21 |
| N6 | 29 mm ±0.5 | 38.5 mm ±0.5 | |
| S2 | M12 | M16 | |
| ØS5 | mm | 16 | 18 |
| S9 | M5x8 | M4x7 | |
| T | mm | 120 | 150 |
| V1 | mm | 12 | 15 |
Project planning information
Load on bearing for calculating the service life
Loads and service life
Mounting
General mounting instructions
Maintenance
load errorCertification
load errorSafety Instructions
load errorDownloads
 | Profiled rail systems Manual | R320103885_EN | 2016-09-01 | English | PDF | 11.5MB Product Groups: Linear guides |
| Catalog BSHP Ball Rail Systems Catalog | R999000485 | 2020-10-01 | English | PDF | 15MB Product Groups: Ball Rail Systems only available as PDF |
Отзывы о товаре
Аналогичные товары
Официальный поставщик Bosch Rexroth
Продажи на территории России
Оптовые и розничные продажи
Снижение логистических расходов
Индивидуальные условия
Выгода без посредников
Единая система поставок
Весь ассортимент на складе