Артикул: RX8118

В наличии

Ball Runner Blocks SLS

Name: Ball Runner Blocks SLS
Brand: Bosch Rexroth
SKU: RX8118

Цена по запросу

Получить КП

Подберем решение под ваши задачи

Поможем выбрать подходящий вариант, проверим совместимость и подготовим коммерческое предложение

Имя

E-mail

Фамилия

Телефон

Указать реквизиты организации или ИП

Комментарий к запросу

Вы можете добавить файлы с реквизитами компании, спецификацией или ТЗ

Мною прочитаны и я даю согласие с документом Политика конфиденциальности

Не отвечаем 5 минут — скидка на весь заказ!

sale@boschrexroth-russia.ru

Нужна скидка? Звони — сделаем лучшее предложение

+7 495 137-07-02

Работаем по всей России

Возможны самовывоз и доставка по всей территории России

Надежность

Профессиональная поддержка

Description

Area of application: For restricted space in transverse direction

Product description

Technical data

General technical data and calculations guiding wagons

Loads due to forces and torques on the guiding wagon

The forces acting on the system are distributed among the guiding wagons depending on the arrangement. The loads due to forces and torques resulting from the effective forces need to be calculated for each guiding wagon when performing the life expectancy calculation. All load calculations require an infinitely rigid mounting base and an infinitely rigid structure. The service life calculation for the IMS is performed in a similar way to the service life calculation for profiled guide rails without a measuring system. Please refer to the respective Ball/Roller Rail Systems catalog.

Load on a single guiding wagon due to forces and torques.

The following table shows the arrangements that are most commonly found in practice. Depending on the selected arrangement, for the IMS guiding wagon the values Fy max and Mz max must be complied with in the application. For these values, see the respective sections on Ball / Roller Runner Blocks.

Version	Arrangement	Forces in z-direction	Forces in y-direction	Torques around the x-axis	Torques around the y-axis	Torques around the z-axis
		Lift-off/down force	Side load	Torsional moment	Longitudinal moment	Longitudinal moment
1	1 rail 1 carriage	Fz	Fy	Mx	My	Mz
2	1 rail 2 carriages	Fz	Fy	Mx	‒	‒
3	2 rails 2 carriages	Fz	Fy	‒	My	Mz
4	2 rails 4 carriages	Fz	Fy	‒	‒	‒
5	2 rails 6 carriages	Fz	Fy	‒	‒	‒
6	2 rails 8 carriages	Fz	Fy	‒	‒	‒

Belastung und Momente

Size		20		25		30		35		45
Preload		C1	C2	C1	C2	C1	C2	C1	C2	C1	C2
Mass	kg	0.67		0.91		1.42		2.1		3.78
Fy max	N	12200		15200		20000		27800		45200
MZ max	Nm	113	126	174		279		437	486	692	988

Values for ball runner block without ball chain with assembled scanner. Compliance with these values will ensure safe functioning of the application. Exceeding these values can lead to destruction of the equipment. For the life expectancy calculation, the values from the “Ball Rail Systems” catalog must be used. Values for ball runner block with ball chain are available on request.

Dimensions

a)	For O-ring (Please note the information given in the Ball Rail Systems catalog)
b)	Lube nipple (included in the scope of delivery)
c)	Minimum bending radius of cable for one-time bending (stationary)
X1:	Position of the reference sensor in the scanner for IMS-I

Dimensions

Size		20	25	30	35	45
A	mm	44	48	60	70	86
A1	mm	22	24	30	35	43
A2	mm	20	23	28	34	45
A3	mm	12	12.5	16	18	20.5
B	mm	91	107.9	119.7	139	174.1
B1	mm	65.6	79.5	89.4	105.5	133.5
B2	mm	23.45	24.95	27.4	29	32.55
E1	mm	32	35	40	50	60
E2	mm	50		60	72	80
E8	mm	32.5	38.3	48.4	58	69.8
E9	mm	7.3	11.5	14.6	17.35	20.9
H	mm	30	36	42	48	60
H1	mm	25.35	29.9	35.35	40.4	50.3
Dimension H2 with cover strip	mm	20.75	24.45	28.55	32.15	40.15
Dimension H2 without cover strip	mm	20.55	24.25	28.35	31.85	39.85
K1	mm	14.8	20.8	21	23.75	35.5
K2	mm	14.8	21.95	22.7	25.25	37.5
K4	mm	3.35	5.5	6.05	6.9	8.2
L	mm	171.9	188.8	202.6	222.2	258.5
N3	mm	7.5	9	12	13	18
N6		13.2 mm ±0.5	15.2 mm ±0.5	17 mm ±0.5	20.5 mm ±0.5	23.5 mm ±0.5
S2		M5	M6	M8		M10
ØS5	mm	6	7	9		14
T	mm	60		80		105
V1	mm	6	7.5	7	8	10
X	mm	93.1	94.6	97.55	99.45	104.2
X1	mm	53.45	54.95	57.4	59	62.55
X2	mm	118.1	119.6	122.55	124.45	129.2
Y	mm	24.93	29.43	34.5	39.5	49.5
Z	mm	43	47	59	69	85

Project planning information

Available versions

			Ball Runner Blocks	SLS
			Ball chain	0/R
			Seal	SS	LS	DS
Size	20	P	C1	✓	✓	✓
	20	P	C2	✓		✓
	25	P	C1	✓	✓	✓
	25	P	C2	✓		✓
	30	P	C1	✓	✓	✓
	30	P	C2	✓		✓
	35	P	C1	✓	✓	✓
	35	P	C2	✓		✓
	45	P	C1	✓		✓
	45	P	C2	✓		✓

Product Overview and Type Designation, Ball Runner Blocks

Mounting

Mounting instructions / maintenance instructions

Safety Instructions

Safety instructions

Downloads

	Integrated Measuring System IMS for Ball and Roller Rail systems / Instructions for electrical interfaces / only PDF Manual \| R320103166_EN \| 2017-10-01 \| English \| PDF \| 2.4MB Product Groups: Integrated measuring systems
	Integrated Measuring System IMS for Ball and Roller Rail Systems Manual \| R320103262_EN \| 2020-07-01 \| English \| PDF \| 1.8MB Product Groups: Integrated measuring systems
	Catalog Integrated Measuring System IMS for Ball and Roller Rail Systems Catalog \| R999000487 \| 2020-06-01 \| English \| PDF \| 2.7MB Product Groups: Ball Rail Systems, Roller Rail Systems, Integrated measuring systems Catalog Integrated Measuring System IMS for Ball and Roller Rail Systems

Отзывы о товаре

Нет отзывов об этом товаре.