Доступно к заказу
Цена по запросу
И выбери подходящего.
Description
- Single connector M17
Technical data
Data for encoder cables REG0011
| RoHS | compliant with EU directive 2002/95/EC |
| AWM Style (UL) | 20233 |
| Diameter, cable | 10 mm ±0.3 |
| Cable sheath material | PUR |
| Cable sheath color | RAL 2003 (orange) |
| Specific cable weight | 0.027 kg/m |
| Oil resistance | EN 60811-2-1 and EN 50363-10-2 |
| Burning behavior | UL 758, section 40, Cable Flame Test Section 1061 as per UL 1581 and CSA C22.2 No. 210-05 Sec. 8.8.2. Test according to DIN EN 60332-1-2 |
| Bending cycles | 5 million |
| Bending radius for flexing installation | 75 mm |
| Bending radius for fixed installation | 40 mm |
For more information on connectors and cables, see the documentation "Rexroth connection cable IndraDrive and IndraDyn" DOK-CONNEC-CABLE*INDRV-CA03-DE-P, R911322948 de-DE, 24.04.2013.
Cable for DRIVE-CLiQ
For IMS with the interface option "DQ" (DRIVE-CLiQ), we recommend MOTION-CONNECT DRIVE-CLiQ-lines with M12-connector for direct measuring systems from the Siemens accessories range.
Cable for FANUC αi
For IMS with the interface option “FN” (FANUC) we recommend the FANUC cable: LX660-4077-T321
Dimensions
Other cable lengths on request
For further technical data/cable description see the IMS R320103262 instructions
Cable lengths
| Part number |
| R911342383 |
Information
Maximum cable length IMS-I
For connection to Rexroth drive controller IndraDrive:
Encoder interface EC (12 VDC supply): maximum length is 75 m
Encoder interface EN2 interface (5 VDC supply): maximum length is 50 m
For connection to other evaluation electronics:
Signal type I1 (1 Vpp, current consumption 300 mA):
Voltage drop over 75 m cable length is 2.05 V, i.e., the encoder supply voltage for the evaluation electronics must be able to be set to at least 6.8 V (for example, by sense-control).
Signal type I2, I3, I4 (TTL, current consumption 350 mA):
Voltage drop over 75 m cable length is 2.30 V, that is, the encoder supply voltage for the evaluation electronics must be able to be set to at least 7.05 V (for example, by sense-control).
Maximal cable length for IMS-A
| Interfaces | Length (m) | Clock rate (MHz) |
| HF | 75 | - |
| SSI | 10 | 2 |
| 48 | 1 | |
| 74 | 0,75 | |
| DQ | in accordance with Siemens specification | |
| FN | 48m (when using the FANUC cable LX660-4077-T321) | |
Please note that the cable length can additionally be limited by:
- Plug-and-socket connections (> two pieces)
- EMC behavior
Be sure to take note of the information in the project planning instructions for IndraDrive drive control units and the EMC project planning. The overall length of the pre-assembled cables is measured inclusive of the connectors.
Ordering codes
| Part number | CAD data | Buy |
| R911342383 |
Downloads
 | Integrated Measuring System IMS for Ball and Roller Rail systems / Instructions for electrical interfaces / only PDF Manual | R320103166_EN | 2017-10-01 | English | PDF | 2.4MB Product Groups: Integrated measuring systems |
| Catalog Integrated Measuring System IMS for Ball and Roller Rail Systems Catalog | R999000487 | 2020-06-01 | English | PDF | 2.7MB Product Groups: Ball Rail Systems, Roller Rail Systems, Integrated measuring systems Catalog Integrated Measuring System IMS for Ball and Roller Rail Systems |
Нет отзывов об этом товаре.