Доступно к заказу
Цена по запросу
И выбери подходящего.
Description
- Quick, economic installation
- Compensates the differences in thermal expansion between machine elements made of different materials
- Eliminates the need for keyways or other positive-locking connections
- Connecting parts have a simple design
- High temperature stability
Features
- Special sizes available on request
- Extremely low-cost machine element
- Resistant to various types of chemical stress
- Fixed and secure connection of machine parts
- Large tolerance zone with connecting parts
- Elastic mounting for small antifriction bearings (0801)
Product description
This curved version is specifically used for the mounting of small antifriction bearings.
Technical data
General technical data
| Size | F 1) 2) | m 3) |
| N | kg | |
| 13 x 5 | 125 | 0.2 |
| 16 x 5 | 150 | 0.21 |
| 19 x 6 | 220 | 0.35 |
| 22 x 7 | 300 | 0.37 |
| 24 x 7 | 330 | 0.5 |
| 26 x 8 | 400 | 0.55 |
| 28 x 8 | 440 | 0.62 |
| 30 x 9 | 520 | 0.7 |
| 32 x 9 | 560 | 0.84 |
| 32 x 10 | 620 | 0.88 |
| 40 x 12 | 810 | 1.31 |
| 1) | Observe the general technical notes and information. |
| 2) | Considerably smaller values are permitted for pulsating and alternating loads. Please consult us. |
| 3) | Per 1000 pieces |
Legend
| Symbol | Description | Unit |
| F | Permissible radial load | N |
| m | Mass | kg |
Tolerances for shafts and holes
Technical data
Fields of application
Application examples
Dimensions
Dimensions
| Size | Tolerance ring dimensions | Connection dimensions 1) | Useful width 1) | ||
| Antifriction bearing Ø | |||||
| d | b | D' | b1 C13 | ||
| mm | mm | mm | mm | mm | mm |
| 13 x 5 | 13 | 5 | 13 ≙ 624 (EL 4) | 13.65 13.6 | 5 |
| 16 x 5 | 16 | 13 ≙ 625 (EL 5) | 16.65 16.6 | ||
| 19 x 6 | 19 | 6 | 19 ≙ 626 (EL 6) 19 ≙ 604 (EL 7) 19 ≙ 635 (R 5) | 19.65 19.6 | 6 |
| 22 x 7 | 22 | 7 | 22 ≙ 608 (EL 8) 22 ≙ 627 (R 7) | 22.65 22.6 | 7 |
| 24 x 7 | 24 | 24 ≙ 609 (EL 9) | 24.65 24.6 | ||
| 26 x 8 | 26 | 8 | 26 ≙ 629 (R 9) 26 ≙ 6000 | 26.65 26.6 | 8 |
| 28 x 8 | 28 | 28 ≙ 6001 | 28.65 28.6 | ||
| 30 x 9 | 30 | 9 | 30 ≙ 6200 | 30.65 30.6 | 9 |
| 32 x 9 | 32 | 32 ≙ 6002 | 32.65 32.6 | ||
| 32 x 10 | 10 | 32 ≙ 6201 | 10 | ||
| 40 x 12 | 40 | 12 | 40 ≙ 6203 | 40.65 40.6 | 12 |
| 1) | Observe the general technical notes and information. |
Project planning information
Inquiry/specification
Calculation
Mounting
Notes for mounting
Design notes
Ordering codes
Material numbers
| Size | Part number | Material 1) | Old material number | Buy |
| 13 x 5 | R080101351 | Corrosion-resistant steel | ANL 13 x 5 | |
| 16 x 5 | R080101651 | ANL 16 x 5 | ||
| 19 x 6 | R080101951 | ANL 19 x 6 | ||
| 22 x 7 | R080102252 | ANL 22 x 7 | ||
| 24 x 7 | R080102451 | ANL 24 x 7 | ||
| 26 x 8 | R080102651 | ANL 26 x 8 | ||
| 28 x 8 | R080102851 | ANL 28 x 8 | ||
| 30 x 9 | R080103051 | ANL 30 x 9 | ||
| 32 x 9 | R080103252 | ANL 32 x 9 | ||
| 32 x 10 | R080103253 | ANL 32 x 10 | ||
| 40 x 12 | R080104052 | ANL 40 x 12 |
| 1) | Up to 250 °C continuous operation, brief peaks up to 300 °C |
| Codes (example) | R0801 022 52 | |
| Form: | ||
| 10 | = | R0810 (AN) |
| 20 | = | R0820 (BN) |
| 01 | = | R0801 (ANL) |
| 04 | = | R0804 (ANS) |
| Tolerance ring diameter (d) | ||
| d = 22 mm | = | 022 |
| Key figure for tolerance ring width (b)/material | ||
| Corrosion-resistant steel | = | 51 - 99 (51, 52, 53, 54, 55, 56) |
When ordering, please use the nine-digit part number.
We have retained the designation in the following tables in order to make the selection easier for you.
For larger quantities, a variety of special versions are possible on request.
Downloads
 | Tolerance rings Catalog | R310EN2970 | 2004-12-01 | English | PDF | 2.1MB Product Groups: Ball transfer units and tolerance rings RE 82970 |
Нет отзывов об этом товаре.