Артикул: RX7445
В наличии
Throttle valve Z.FG
Цена по запросу Стоимость зависит от выбранного способа оплаты и количества товара.
Не отвечаем 5 минут — скидка на весь заказ!
Нужна скидка? Звони — сделаем лучшее предложение
Работаем по всей России
Возможны самовывоз и доставка по всей территории России
Надежность
Профессиональная поддержка
Description
- Size 10
- Component series 3X
- Maximum operating pressure 315 bar
- Maximum flow 160 l/min
Features
- Sandwich plate valve
- Porting pattern according to ISO 4401-05-04-0-05
- For limiting the main or pilot flow of two consumer ports
- Adjustment type: Spindle with internal hexagon and scale
Product description
The valve type Z.FG is a throttle valve in sandwich plate design. It is used for the flow limitation of one or two actuator ports.
Two symmetrically arranged throttle valves limit flows in both directions.
In case of throttling, the hydraulic fluid is directed through channel A1 or B1 via throttling point (1) formed by the control edge (2) and the throttle spool (3.1) to actuator A2 or B2. The throttle spool (3.1) can be axially adjusted via the spindle (4) for adjustment of the flow via the throttling point (1). The flow depends on the pressure differential and viscosity.
In version "P", throttling is realized in channel P. Channels A and B have free flow. In version "A" or "B", the channel without throttling has free flow.
Type Z2FG 10-5-3X/V
| ➀ | component side |
| ➁ | plate side |
Type code
| 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | ||
| Z | FG | 10 | 5 | – | 3X | / | V | * |
| 01 | Sandwich plate valve | Z |
| Number of functions | ||
| 02 | 1 – Throttling in channel A, B or P | 1 |
| 2 – Throttling in channel A and B | 2 | |
| 03 | Throttle valve | FG |
| 04 | Size 10 | 10 |
| 05 | Throttling in channel A and B | – |
| Throttling in channel A | A | |
| Throttling in channel B | B | |
| Throttling in channel P | P | |
| Adjustment type | ||
| 06 | Spindle with internal hexagon and scale | 5 |
| 07 | Component series 30 ... 39 (30 ... 39: unchanged installation and connection dimensions) | 3X |
| Seal material | ||
| 08 | FKM seals | V |
| Observe compatibility of seals with hydraulic fluid used. (Other seals upon request) | ||
| 09 | Further details in the plain text | * |
Technical data
general
| Size | 10 | ||
| Weight (approx.) | Version "A" | kg | 3 |
| Version "B" | kg | 3 | |
| Version "P" | kg | 2.5 | |
| Version "-" | kg | 3 | |
| Installation position | any | ||
| Ambient temperature range | °C | -20 … +80 | |
hydraulic
| Size | 10 | ||
| Maximum operating pressure | bar | 315 | |
| Maximum flow | l/min | 160 | |
| Hydraulic fluid | Mineral oil (HL, HLP) according to DIN 51524, other hydraulic fluids on request | ||
| Hydraulic fluid temperature range | °C | -20 … +80 | |
| Viscosity range | mm²/s | 10 … 800 | |
| Maximum admissible degree of contamination of the hydraulic fluid 1) | Class 20/18/15 according to ISO 4406 (c) | ||
| 1) | The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter. |
(For applications outside these values, please consult us!)
Diagrams/characteristic curves
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves at constant throttle position
Symbols/Circuit diagrams
Type Z1FG 10 A5-3X/V
Type Z1FG 10 B5-3X/V
Type Z1FG 10 P5-3X/V
| ➀ | component side |
| ➁ | plate side |
Type Z2FG 10 –5-3X/V
Dimensions
Version "-"
Dimensions in mm
| 1 | Name plate |
| 2 | Adjustment type "5" Spindle with internal hexagon and scale for flow cross-section adjustment (internal hexagon SW8)
|
| 3 | 4 valve mounting bores |
| 4 | R-ring plate |
| 5 | Identical seal rings for ports A, B, P, TA, TB |
| 6 | Porting pattern according to ISO 4401-05-04-0-05 |
Version "A"
Dimensions in mm
| 1 | Name plate |
| 2 | Adjustment type "5" Spindle with internal hexagon and scale for flow cross-section adjustment (internal hexagon SW8)
|
| 3 | 4 valve mounting bores |
| 4 | R-ring plate |
| 5 | Identical seal rings for ports A, B, P, TA, TB |
| 6 | Porting pattern according to ISO 4401-05-04-0-05 |
Version "B"
Dimensions in mm
| 1 | Name plate |
| 2 | Adjustment type "5" Spindle with internal hexagon and scale for flow cross-section adjustment (internal hexagon SW8)
|
| 3 | 4 valve mounting bores |
| 4 | R-ring plate |
| 5 | Identical seal rings for ports A, B, P, TA, TB |
| 6 | Porting pattern according to ISO 4401-05-04-0-05 |
Version "P"
Dimensions in mm
| 1 | Name plate |
| 2 | Adjustment type "5" Spindle with internal hexagon and scale for flow cross-section adjustment (internal hexagon SW8)
|
| 3 | 4 valve mounting bores |
| 4 | R-ring plate |
| 5 | Identical seal rings for ports A, B, P, TA, TB |
| 6 | Porting pattern according to ISO 4401-05-04-0-05 |
Valve mounting screws (separate order)
4 hexagon socket head cap screws ISO 4762 - M6 - 10.9-flZn-240h-L
Friction coefficient μtotal = 0.09 to 0.14,
Tightening torque MA = 12 Nm ± 10%
Downloads
 | Throttle valve Data Sheet | RE27488 | 2007-05-01 | English | PDF | 174k Product Groups: Throttle valves |
Отзывы о товаре
Официальный поставщик Bosch Rexroth
Продажи на территории России
Оптовые и розничные продажи
Снижение логистических расходов
Индивидуальные условия
Выгода без посредников
Единая система поставок
Весь ассортимент на складе