Артикул: RX7378
4/3 directional spool valve, direct operated, with solenoid actuation VEDS-10A-43
Доступно к заказу
Цена по запросу
И выбери подходящего.
Description
- Size 10
- Component series 0
- Maximum operating pressure 350 bar
- Maximum flow 35 l/min
Features
- Mounting cavity R/UNF10-04-0-06
- Wet-pin DC solenoids
- Solenoid coil can be rotated
- Optional auxiliary operating device
Product description
General information
The 4/3 directional spool valves are direct operated, pressure-compensated screw-in cartridge valves. They control the start, stop and direction of flow and basically consist of pole tube (1), socket (2), a control spool (5) and a return spring (4).
Function
In the de-energized condition, the control spool (5) is held in the initial position by the return spring (4). The control spool (5) is actuated by wet-pin DC solenoids (3.1; 3.2). The symbols are realized by different spools (“10”; “20”; “40” and "60"). The main ports ➁, ➂ and ➃ can be pressurized continuously with an operating pressure of 350 bar. The ports have a fixed pin assignment (see Symbols). At port ➀, there may be a maximum pressure of 250 bar.
The manual override (6) allows for the switching of the valve without solenoid energization.
Version "C4"
Version "K4"
Version "K40"
Type VEDS-10A-43…
| ➀ | Main port 1 (T) |
| ➁ | Main port 2 (A) |
| ➂ | Main port 3 (P) |
| ➃ | Main port 4 (B) |
| 7 | Initial position |
| 8 | Spool position “a” |
| 9 | Spool position “b” |
Type code
(valve without coil)1)
| 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 10 | 11 | 12 | |||
| VEDS | - | 10A | - | 43 | OD14 | 78 | KK2 | 0 | 0 |
| 01 | Directional spool valve, direct operated | VEDS | |
| 02 | Frame size 10 | 10A | |
| 03 | 4/3-way version | 43 | |
| Symbols | |||
| 04 |  |  | 10 |
 |  | 20 | |
 |  | 40 | |
 |  | 60 | |
| 05 | Without manual override | 0 | |
| With pull/push manual override | -M1 | ||
| 06 | 4/3 directional spool valve, direct operated, with solenoid actuation | OD14 | |
| Symbols | |||
| 07 | see item 04 | 10 | |
| 20 | |||
| 40 | |||
| 60 | |||
| 08 | Frame size 10: R/UNF 10-04-0-06, see Installation bore | 78 | |
| 09 | On/off valves with 2 coils | KK2 | |
| 10 | Without manual override | 0 | |
| With pull/push manual override | 1 | ||
| 11 | Standard version | 0 | |
| 12 | Revision status | 0 | |
| 1) Complete valves with mounted coil on request. | |
Technical data
general
| Size | 10 | ||
| Weight | Valve | kg | 0.35 |
| Coil | kg | 0.25 | |
| Installation position | any - if it is ensured that no air can accumulate upstream of the valve. Otherwise, we recommend suspended installation of the valve | ||
| Ambient temperature range 1) | °C | -40 … +110 | |
| Storage temperature range | °C | -20 … +80 | |
| 1) | see voltage tolerance characteristic curve |
general (environmental audits)
| Salt spray test according to DIN 50021 | h | 720 |
| Surface protection DC solenoids | Coating according to DIN 50962-Fe//ZnNi with thick film passivation |
hydraulic
| Size | 10 | ||
| Maximum operating pressure | bar | 350 | |
| Port ➁ | bar | 350 | |
| Port ➂ | bar | 350 | |
| Port ➃ | bar | 350 | |
| Port ➀ | bar | 250 | |
| Maximum flow | l/min | 35 | |
| Zero flow 1) | ml/min | < 60 | |
| Hydraulic fluid | see table | ||
| Hydraulic fluid temperature range | °C | -40 … +80 | |
| Viscosity range 2) | mm²/s | 5 … 1000 | |
| Maximum admissible degree of contamination of the hydraulic fluid 3) | Class 20/18/15 according to ISO 4406 (c) | ||
| Fatigue strength according to ISO 10771 | 2 million | ||
| 1) | With Δp = 250 bar; HLP46, ϑOil = 40 °C. |
| 2) | preferably 10 to 100 mm2/s |
| 3) | The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter. |
| Hydraulic fluid | Classification | Suitable sealing materials | Standards | |
| Mineral oils | HL, HLP | FKM |
DIN 51524 | |
| Bio-degradable | Insoluble in water | HEES | FKM | VDMA 24568 |
| Soluble in water | HEPG | FKM | ||
| Important information on hydraulic fluids!
| ||||
In the electrical connection, the protective earthing conductor (PE, grounded) is to be connected in accordance with the stipulations.
electrical
| Voltage type | Direct voltage | ||
| Power supply 1) | V | 12 24 | |
| Voltage tolerance against ambient temperature | see voltage tolerance characteristic curve | ||
| Power consumption | W | 22 | |
| Duty cycle | % | 100 | |
| Maximum coil temperature 2) | °C | 150 | |
| Switching time according to ISO 6403 | ON | ms | ≤ 80 |
| OFF | ms | ≤ 50 | |
| Maximum switching frequency | 1/h | 15000 | |
| Protection class according to DIN EN 60529 (VDE 0470-1), DIN 40050-9 | Version "K4" | IP65 (If a suitable and a correctly mounted mating connector are used.) | |
| Version "C4" | IP66 with mating connector mounted and locked IP69K with Rexroth mating connector (material no. R901022127) | ||
| Version "K40" | IP69K with mating connector mounted and locked | ||
| 1) | Other voltages upon request |
| 2) | Due to the surface temperatures occurring at solenoid coils, the European standards ISO 13732-1 and ISO 4413 need to be adhered to. |
(For applications outside these values, please consult us!)
Diagrams/characteristic curves
Voltage tolerance against ambient temperature; duty cycle
Voltage range and duty cycle dependent on the ambient temperature
(measured with HLP46, ϑoil = 40 ±5 °C) and 24 V coil
Δp-qV characteristic curves – Symbol “10”
Δp-qV characteristic curves – Symbol “20”
Δp-qV characteristic curves – Symbol “40”
Δp-qVcharacteristic curves – Symbol “60”
Performance limits (measured with HLP46, ϑOil = 40 ±5 °C)
Symbol “10” and “20”
Symbol “40”
Symbol “60”
Attention!
The specified performance limits are valid for use with two directions of flow (e. g. from ➂ to ➁ and simultaneous return flow from ➃ to ➀). Due to the flow forces acting within the valves, the admissible performance limit may be considerably lower with only one direction of flow (e. g. from ➂ to ➁ while port ➃ is blocked)!
In such use cases, please consult us!
The performance limit was determined when the solenoids were at operating temperature, at 10 % undervoltage and without tank preloading.
Symbols/Circuit diagrams
Symbol “10”
Symbol “20”
Symbol “60”
Dimensions
Dimensions in mm
| 1 | Mating connectors (separate order) |
| 2 | Space required to remove the mating connector |
| 3 | Wrench size 24, tightening torque MA = 55+5 Nm |
| 4 | Dimension for mating connector “K4”, without circuitry |
| 5 | Dimension () for mating connector “K4”, with circuitry |
| 6 | Version "K40" |
| 7 | Version "C4" |
| 8 | Nut, tightening torque MA = 5+1 Nm |
| 9 | Coil (separate order, see type key) |
| 10 | Pull/push manual override "1" |
| ➀ | Main port 1 (T) |
| ➁ | Main port 2 (A) |
| ➂ | Main port 3 (P) |
| ➃ | Main port 4 (B) |
| LS | Location shoulder |
Mounting cavity R/UNF-10-04-0-06; 4 main ports; thread 7/8-14UNF-2B
Dimensions in mm
| 1) | Visual inspection |
| ➀ | Main port 1 (T) |
| ➁ | Main port 2 (A) |
| ➂ | Main port 3 (P) |
| ➃ | Main port 4 (B) |
| LS | Location shoulder |
| Tolerance for all angles ± 0.5 ° | |
| All seal ring insertion faces are rounded and free of burrs | |
Accessories
Mating connectors for directional valves with connector "C4" and "C4Z" (AMP Junior-Timer), litz wire outer diameter 2.2 mm to 3.0 mm
2P JUNIOR D2 2
Mating connectors for directional valves with connector "C4" and "C4Z" (AMP Junior-Timer), litz wire outer diameter 2.2 mm to 3.0 mm
2P JUNIOR D2 2
- For directional valves with connector "C4" and "C4Z" (AMP Junior-Timer)
Ordering codes
Нет отзывов об этом товаре.