2/2 directional spool valve, direct operated with solenoid actuation KKDER1 N/P (High Performance)

Description

• Size 1
• Component series A
• Maximum operating pressure 350 bar
• Maximum flow 55 l/min

Features

• Mounting cavity R/T-13A
• Direct-controlled directional slide valve with solenoid actuation
• Flow possible in both directions
• Very low flow resistances
• Positive overlap prevents switching shocks
• Wet-pin DC solenoids
• Solenoid coil can be rotated
• With concealed manual override

Product description

General information

The 2/2 directional spool valves are direct operated, pressure-compensated screw-in cartridge valves. They control the start, stop and direction of flow and basically consist of a housing (1) with moveable socket (2), a control spool (5) and a return spring (4).

Function

In the de-energized condition, the control spool (5) is held in the initial position by the return spring (4). The control spool (5) is actuated by wet-pin DC solenoids (3). The different symbols are realized by corresponding spools (N and P). The main ports ➀ and ➁ can be loaded continuously with an operating pressure of 350 bar and the flow can be directed into both directions (see Symbols).

The manual override (6) allows for the switching of the valve without solenoid energization. It is available in screwable version "N10" (7) (see Type keys).

Version "K4" (with mating connector)

Type KKDER1NA/HN9V

Version "C4"

Type code

(valve without coil)1)

01	Directional spool valve, direct operated, electrically operated		KKDE
02	Maximum operating pressure 350 bar		R
03	Component size		1
04	2 main ports
Symbols			N
			P
05	Component series		A
06	High Performance and mounting cavity R/T-13A (see Mounting cavity)		H
07	Without manual override		N0
	With concealed manual override 2)		N9
Seal material
08	FKM seals (other seals upon request) Observe compatibility of seals with hydraulic fluid used.		V
09	Further details in the plain text		*

Technical data

general

hydraulic

electrical

(For applications outside these values, please consult us!)

With the electrical connection "K4", the protective earthing conductor (PE, grounded) is to be connected in accordance with the stipulations.

Diagrams/characteristic curves

Voltage tolerance against ambient temperature; duty cycle

Voltage range and duty cycle dependent on the ambient temperature

(measured with HLP46, ϑoil = 40 ±5 °C) and 24 V coil

Δp-qV characteristic curves – Symbol N

Δp-qV characteristic curves – Symbol P

Performance limits (measured with HLP46, ϑOil = 40 ±5 °C and 24 V coil)

Symbol N

Symbol P

Attention!

The performance limit has been determined with the solenoids at operating temperature and with 10 % undervoltage.

Symbols/Circuit diagrams

Symbol “P”

Symbol “N”

Dimensions

Dimensions in mm

Mounting cavity R/T-13A; 2 main ports; thread M20 x 1.5 mm

Dimensions in mm

Accessories

Mating connectors for directional valves with connector "C4" and "C4Z" (AMP Junior-Timer), litz wire outer diameter 2.2 mm to 3.0 mm

2P JUNIOR D2 2

Mating connectors for directional valves with connector "C4" and "C4Z" (AMP Junior-Timer), litz wire outer diameter 2.2 mm to 3.0 mm

2P JUNIOR D2 2

• For directional valves with connector "C4" and "C4Z" (AMP Junior-Timer)

• Data sheet

• Spare parts and repair

Ordering codes

Downloads

2/2-way directional spool valve, direct-operated, with solenoid actuation KKDE.1 Data Sheet | RE18136-06 | 2021-05-11 | English | PDF | 389k Product Groups: Direct operated, 2/2 directional spool valves, direct operated with solenoid actuation Size 1, Series A