Затрудняетесь с выбором?
Оставьте ваш телефон, и наш специалист перезвонит вам
Доступно к заказу
Цена по запросу
Получи КП от 5 лучших поставщиков
С указанием цены, наличия, сроков поставки и скидок.
И выбери подходящего.
И выбери подходящего.
Description
- The cover strip is easy to clip on and remove, thereby considerably simplifying and speeding up assembly.
- No need to plug every single hole.
- No time delay while waiting for adhesive to harden when using adhesive tape.
- Can be mounted and removed several times (up to four times).
- For initial installation, storage and replacement
Project planning information

- For mounting or replacing a cover strip, if the Ball Runner Block or connection structure cannot be removed.
- A section of the snap fit cover strip is very slightly widened and can then be easily slid under the Ball Runner Block.
Preparing the sliding-fit section subsequently

An expanding tool for cover strips can be used to create a sliding fit after installation. The main advantage is that the sliding length LS can be optimized accordingly for the installation.
Note:
- The cover strip is a precision-machined part that requires careful handling. Above all, it must not be bent.
- Risk of injury at the edges and ends of the cover strip!
- Wear gloves.
Note
A suitable cover strip with snap fit or with sliding fit is available for each Ball Guide Rail SNS.
Mounting
Notes for mounting cover strip
Secure the cover strip!
- Observe the notes for mounting! Please request the "Mounting instructions for cover strip".
Ordering codes

LS = length of the sliding section (mm)
L = rail length (mm)
Material numbers
| Size | Part number | Buy | Mass |
| g/m | |||
| 15 | R161913010 | 10 | |
| 20 | R161983010 | 29 | |
| 25 | R161923010 | 25 | |
| 30 | R161973010 | 40 | |
| 35 | R161933030 | 80 | |
| 45 | R161943030 | 100 | |
| 55 | R161953030 | 120 | |
| 65 | R161963030 | 140 |
Ordering example – cover strip with sliding fit
- Ball Guide Rail SNS
- Size 35
- Rail length L = 2,696 mm
- Length of sliding fit LS = 1,200 mm
Code
Material number, length L (mm), length of sliding fit LS (mm)
R1619 330 30, 2696, 1,200 mm
Observe the notes for mounting! Please request the "Mounting instructions for cover strip".
Downloads
| Ball and Roller Rail Systems Measuring Instuctions for the Rail Seal Manual | R320103021 | 2003-04-01 | English, French, German, Italian | PDF | 1.4MB Product Groups: Linear guides |
Запрос цен, наличия или консультация
Пришлем актуальную информацию по ценам, скидкам, наличию товара на складе и срокам поставки

НовостиВсе новости


Нет отзывов об этом товаре.