Артикул: RX8087
Ball Transfer Units with clip as fastening element R0536 1..
Доступно к заказу
Цена по запросу
И выбери подходящего.
Description
- With fastening element
- Easily mountable and extractable from the load side
- Fixing is by means of spring clips, which permit generous tolerances in the mounting hole
- Reinforced cover to withstand heavy impact loads
- Cover and housing galvanized
Features
- Balls made from antifriction bearing steel 1.3505
Technical data
Technical data
| Size | 15 | 22 | 30 | |
| C | N | 500 | 1300 | 2500 |
| C0 | N | 1000 | 2600 | 5000 |
| vmax 1) | m/s | 2 | ||
| m | kg | 0.044 | 0.146 | 0.29 |
| Operating conditions | ||||
| Size | 15 | 22 | 30 | |
| Admissible operating temperature (min ... max) 2) | -30 °C ... +100 °C | |||
| 1) | In case of prolonged periods of use at speeds above 1 m/s, an increase in temperature and reduction in service life needs to be reckoned with depending on the load. |
| 2) | At temperatures above 100 °C, only bright metal load balls without a felt seal should be used. Make allowance for reduction in load capacity. Use high-temperature lubricant! Follow the manufacturer’s instructions! The existing lubricant oil may have to be washed out. |
At temperatures above 100 °C, only bright metal ball transfer units without a felt seal should be used. Note the reduction in load capacity! Use high-temperature lubricant! Follow the manufacturer’s instructions! The existing lubricant oil may have to be washed out.
Temperature factor
| Temperature (°C) | Temperature factor ft |
| 125 | 0,9 |
| 150 | 0,8 |
| 175 | 0,7 |
| 200 | 0,5 |
The load capacity must be multiplied by the temperature factor.
Legend
| Symbol | Description | Unit | Picture |
| C | Dynamic load capacity | N |  |
| C0 | Static load capacity | N | |
| vmax | Conveying speed | m/s | |
| m | Mass | kg |
Technical data
Fields of application
Applications
- General-purpose machines
- Feed tables for sheet-metal working machines
- Fixtures for press brakes
- Feed devices for machining centers
- Drilling tables and motor-driven supporting tables
- Assembly aids in the manufacture of large engines and motors
- Construction of special-purpose machines
- Aerospace industry
- Beverages and stone-processing industries
- Not suitable for use under water
Conveyor systems
- Ball transfer tables, turntables and switches for sorting and distribution systems
- Crossover sections of continuous conveyors
- Baggage sorting systems at airports
- Transport of steel tubes and pipes
- Lifting platforms
Dimensions
Dimensions
| Size | dw | D | Tolerance for D | D1 | h | Tolerance for h | H | b |
| mm | mm | mm | mm | mm | mm | mm | mm | |
| 15 | 15.875 | 24 | - 0.13 | 31 | 9.5 | ± 0.2 | 20 | 5.5 |
| 22 | 22.225 | 36 | - 0.16 | 45 | 9.8 | 28.6 | 6.2 | |
| 30 | 30.162 | 45 | - 0.25 | 55 | 13.8 | ± 0.3 | 37.2 | 8.2 |
Installation dimensions
| Size | DB | Tolerance for DB | s |
| mm | mm | mm | |
| 15 | 24 | + 0.5 | 1.5 |
| 22 | 36 | + 0.8 | 2 |
| 30 | 45 | + 1 | 2.5 |
Mounting
Ball Transfer Unit Installation Examples
Certification
load errorSafety Instructions
load errorDownloads
 | Ball Transfer Units Catalog | R999000498 | 2016-07-01 | English | PDF | 4.8MB Product Groups: Ball transfer units and tolerance rings |
Нет отзывов об этом товаре.